Arrange A Zoom Meeting >>

How To Start A Wood Pellet Plant Design?

Starting a wood pellet plant is never an easy job. It is always involved with lots of things to consider and practice. Most people who tend to design the wood pellet plants always have the necessary raw materials at their disposal which are mainly biomass rich. Such materials include wood blocks, sawdust, bark, trees branches and twigs. While setting up a wood pellet plan design, there are things you need to consider.

What do you need to consider before setting up a wood pellet plant design?

  • Your funds and budget are the first things to consider in your wood pellet plant design. Your budget tends to tell the scale of the wood pellet plant regarding large size or small scale. In case you do not have sufficient funds, then consider lowering your capacity. Consequently, you can get even lower some relatively unimportant equipment. However, in cutting cost, it is never advisable to substitute the necessary equipment with low price and low-quality ones. You might end up regretting the move.

wood pellet plant design
  • Your workshop is another thing that you need to consider in designing a wood pellet plant. In fact, the funds available to you will tend to determine your workshop size in that the higher the resources, the bigger the workshop you can build. Again, consider having your wood pellet plan design near your raw material to ensure that you cut the cost of raw material transportation. Consequently, if you have a workshop, determine its height, width, and length. Consider then designing your wood pellets depending on your workshop size to ensure it is enough to lace the equipment.


What needs to be included in the wood pellet plant design?

To keep the best of the wood pellet plant design, the following measures need to be included rimarily to the raw materials:

  1. The raw material size of the wood pellet plant is required to be readily produced in high-grade pellet status hence ensure you give essential attention and concern to the raw aterial size.

  2. Secondly, ensure the cleanliness of the raw materials. There is fact in the statement, the cleaner the raw material then definitely the high the effectiveness of the wood pellet plant production.

  3. Consequently, moisture is another key feature to ensure your raw material. Ensure that then your raw material is not too moist or less. Too much humidity can alter the pellet quality and result in more energy consumption and importantly wear out of equipment. Ensure that the moisture is between 8-15 %.

  4. Hardness is another issue to consider for your raw materials. Ensure that they are not too hard to ensure easy making process of the pellets and also avoid damaging the spare parts.

  5. Further, ensure that your wood pellet plant design raw materials are highly viscous so as they can easily adhere to the inside part of the pellet mill. Failure this, then the production capacity will be reduced while also altering the normal operation of pellet mill.

  6. Lastly, on the raw material, the density should be high to ensure that they a more significant capacity of the pellet mill.

wood pellets

Operating factors ought to have the following features to ensure the best of the wood pellet design.
  1. The adjustment of the roller and ring die to appropriate location is vital. Correct pressure is a guarantee to good outcomes for the pellet density.

  2. Secondly, ensure that you replace the old ring on the die on time always since it is a wearing out part together with the roller. If you observer uses them, then the pellet mill will not perform adequately as required.

  3. Consequently, ensure that you have selected the appropriate ring die specification. This is to provide that you keep good and quality pellets.

  4. Again ensure that uniform raw materials are feeding the pellet mill to maintain the required friction factor among raw materials, rollers and the ring die that is on the inside.

  5. Adopting of a cooling system is also an essential operational factor. This prevents the pellets from loosening. After cooling the proper temperature should be +3-5 higher than the average room temperature.

  6. The most fundamental step of the operational factor is the strict use of the practical manual. Consequently, well maintained and cleaning of the equipment if necessary.

  7. Lastly, and to emphasize, a uniformed raw material will ensure proper coordination of operational factor for the pellet mill efficient functioning and durability.


What will the wood pellet plant bring you?

The wood pellet plant is a guarantee for you to produce quality pellets. Also, you are sure that with the right procedures of the pellet design then the operational factors will flow appropriately. Consider then having a wood pellet plant designed fittingly to your advantage.


Please provide us with project information as much as possible:

  • For a complete project: the material availability,the required output capacity,the process technology,your budgetary and financing status,the estimated starting time,etc.
  • For singular machinery: the model,the capacity,your budgetary information,other requirements,etc.
  • For spare parts: size and dimensions,material and weight,and your drawings with details,you can send the drawing to

Detailed information is greatly helpful for us to give you the best-customized offer/quotation at the soonest time.

Get In Touch Now!
Your privacy is important to us and your information will be well protected!